皮線皮纜松套管開剝器FDS-2-3MM

 

型      號：FDS-2-3MM
產      地：美國

 

產品簡介   

· 專為光纖到戶用皮線光纜開剝用途而設計，是剝至2mm和3mm松套管的多用途工具

· 三個開剝通道置于一只緊湊的工具內，三通道分別剝除外護套，縱剝2 mm和3mm松套管

· 輕質聚合物外殼

· T形把手設計，易于剝除外護套

· 此工具可用于下表中皮線光纜生產廠商的產品

· CB229:可更換外護套開剝刀片

· 松套管縱剝刀片：80794（一套兩片）

· 注意：如要更換刀片，需兩片CB229, 兩套80794

· 長度: 95mm

· 重量: 193g

窗口開剝器MSAT5

 

型      號：MSAT5
產      地：美國’

 

 

 

產品簡介   

· 實現松套管窗口開剝

· 適于套管直徑：1.9mm - 3.0mm

· 精確開剝鉗口不傷光纖

· 帶尺寸標識的鉗口迅速找到松套管尺寸

· 帶鎖緊機構，確保在整個開剝操作過程中工具保持緊閉狀態

· 長度: 99.00 mm

· 高度: 38.00 mm

· 寬度: 18.00 mm

· 重量: 38.5g

· 可更換刀片米勒產品編碼：80935 (5只刀片+2只螺絲)

MSAT 5
Mid-Span Access Tool

· Allows easy mid-span access to optical fibers in loose buffer tubes

· Access tube sizes from 1.9mm to 3.0mm

· Shaves precise opening to prevent fiber damage

· Sizing channels to easily determine tube size

· Locking mechanism ensures tool will remain closed through the entire shaving operation

· Made in the U.S.A.

· Part No.: 80930

· View a demonstration of the MSAT 5 tool on YouTube!

Length: 3.86 in (99.00 mm)Height: 1.482 in (38.00 mm)Width: 0.702 in (18.00 mm)Weight: 1.35 ounces (38.5g)

鎧裝纜剝皮器ACS

 

型      號：ACS
產      地：美國

 

 

產品簡介   

· 專業鎧裝線纜的銅，鋼或鋁材質褶皺鎧裝層縱切，線纜類型包括饋線光纜，中心束管式光纜，層絞式光纜及其他鎧裝纜

· 多元化設計可實施非光纜結構的護套或鎧裝外套縱切

· 一次性開剝聚乙烯護套和鎧裝護套

· 實施縱向切割和環形切割

· 轉動拔桿可將刀刃旋轉90º，使得窗口開剝易于實現（縱切&環切）

· 可調開剝外徑8-28.6mm

· 可調切割深度最大5.5mm，適于不同外皮厚度

· 耐用陽極處理鋁材鋼材結構

· 可更換刀片型號：CB251K

· 滾筒狀線纜跟隨器確保開剝過程中線纜穩定，且工具易于延線纜方向操作

· 高度：127mm

· 重量：284g

松套管及皮線纜縱剝鉗

 

型      號：405
產      地：美國

 

產品簡介   

· 硬質松套管及皮線光纜開窗口及末端開剝用途

· 不同型號適于不同松套管或皮線光纜尺寸

· 雙刀刃設計

· 自閉合的安全設計

· 工具閉合插銷鎖

· 舒適的軟質手柄套

· 可換刀片: 80235 (需要成對更換)

· 長度: 165 mm

· 重量: 255g

400 Series Kit - Fiber Buffer Tube and Drop Cable Slitter

· For mid-span and end slitting of hard fiber buffer tubes and fiber drop cable

· Interchangeable color coded head blocks matched to buffer tube or drop cable size

· Standard kit contains tool body and 3 pairs of interchangeable heads all packed in a durable plastic carrying case

· Block sizes included in standard kit, slit the following cable sizes: 2.3-2.5 mm, 2.7-3.0 mm and 4.4x8.2 mm. For other sizes please contact Customer Service

· Dual blade design

· Self closing for safety

· Latch locks tool closed

· Comfortable plastic grips

· Made in the USA

· Replacement Blade Part No.: 80235 (2 required)

· Part No.: 80830

Length: 11.39 in (292.00 mm)Height: 2.4765 in (63.50 mm)Width: 8.19 in (210.00 mm)Weight: 1.64 lbs. (748.0 g)

數據線纜剝線器SMART-STRIP

 

型      號：SMART-STRIP
產      地：美國

產品簡介   

· 多用途小型化適于剝除所有標準絕緣層

· Smart-Strip在（0.75-10mm）范圍內的導線或者線纜的標準絕緣層確保精準的切割深度

· 剝除UTP及STP網絡數據線纜

· 準確的深度調節機構可使操作人員根據標準絕緣層及各種線纜直徑更改設定

· 內置彈簧加壓機構

· 可提供固定切割深度的型號

· 長度: 97.00 mm

· 高度: 19.00 mm

· 寬度: 38.00 mm

· 重量: 40g

 

鋼帶鎧裝線纜剝除器 STR

 

型      號：STR
產      地：美國

 

產品簡介   

· 易于打開/分解光纜鋼制帶狀鎧裝層

· 獨特的旋轉機構，轉動兩圈半到三圈半即可打開帶狀

· 鋼制鎧裝層，便于剪斷

· 適于鋼制鎧裝外徑1至2mm

· 少有的釹磁鐵設計將工具的兩半吸合在一起，便于轉動

· 工具經熱處理，壽命長

· 螺絲夾具使用高強度合金鋼

· 38.1mm外徑，手感舒適

· 長度: 38.10 mm

· 厚度: 20.70 mm

· 重量: 258g

網線護套開剝器 LDT-UTP

 

型      號：LDT-UTP
產      地：美國

產品簡介   

· LDT-UTP用于剝除CAT5, CAT5E及CAT6 UTP/STP線纜護套

· 澆鑄的刀刃腔體確保精確的護套剝除，不傷對絞線導體

· 出廠預設刀片，無需調校

· 可更換刀片：RC-UTP(米勒產品編號：42687)

· 注: 此工具不適于Plenum系列線纜結構

· 長度: 102mm

· 重量：23g

網線護套開剝器DDT-UTP

 

型      號：DDT-UTP
產      地：美國

產品簡介   

· DDT-UTP設計用來剝除CAT5, CAT5E, CAT6及大直徑10G UTP/STP線纜護套
澆鑄的刀刃腔體確保精確的護套剝除，不傷對絞線導體
出廠預設刀片，無需調校
DDT組合工具省去了傳統開剝UTP/STP對絞線時需要不同線徑的各種工具
注:此工具不適于Plenum系列線纜結構
可更換刀片：RC-UTP(米勒產品編號：42687)
RC-UTP-10G(米勒產品編號：42768)
長度: 92mm
重量: 57g

 

皮線皮纜開剝器FDS

 

型      號：FDS
產      地：美國

 

產品簡介   

· 專為光纖到戶用扁平皮線光纜開剝而設計

· 一步開剝，將外護套分成兩半，非金屬加強芯直接暴露，使得剝除護套十分便捷

· 小型輕便的聚合物外殼便于操作

· 易于剝除皮線光纜，長度從70cm到4.5m以上

· FDS單把工具即可剝除下列清單內的皮線光纜

· CB229：可更換刀片

· 長度: 95.00 mm

· 重量: 193.0g

FDS Fiber Drop Stripper
Fiber Drop Stripper

· Designed for stripping Flat Drop Fiber Cable used in FTTH “Fiber to the Home” applications

· ONE STEP stripping action that removes the jacket in two locations to expose the dielectric strength members and allowing the quick removal of the jacket

· Tool is small and has a lightweight polymer body for ease of use

· Easily strips Flat Drop lengths of 2-15 feet plus

· ONE TOOL ONLY-FDS will strip Flat Drop Fiber Cable on the cables listed in the table below. (Please call us for other cable manufacturers) Made in the U.S.A.

· Replacement Blade Part No.: 37048 (CB229)

· FDS Part No.:42670

· Made in the U.S.A.

Length: 3.71 in (95.00 mm)Weight: 6.76 ounces (193.0g)

 

 

 

FDS-2-3MM Fiber Drop Stripper & Buffer Tube Slitter

· Multi-purpose tool designed for stripping Flat Drop Fiber jacket and accessing 2 mm and 3mm buffer tubes on (FTTH) “Fiber to the Home” applications

· Three individual stripping channels in one compact tool body for jacket removal and 2 mm and 3mm buffer tube slitting • Lightweight polymer body

· T-bar handle grip design for extra ease of jacket stripping

· Tool can be used with Flat Drop Fiber manufacturers listed in the table below. (Please call Customer Service for other cable manufacturers)

· Made in the U.S.A.

Length: 3.71 in (95.00 mm)Weight: 6.76 ounces (193.0g)